Filter
Top Products
Configuring network settings
Cisco TelePresence ISDN Gateway 2.1 Online help (Printable format) 56 of 135
Ethernet configuration
These settings determine the Ethernet settings for the appropriate port of the ISDN Gateway. Refer to the
table for assistance with these settings. When you have finished, click Update Ethernet configuration.
Field Field description Usage tips
Ethernet
settings
Specify whether you want this Ethernet port to
automatically negotiate its Ethernet settings with
the device it is connected to, or if it should use
the values that you specify in the Manual
configuration fields below.
It is important that your Ethernet
settings match those of the device to
which this port is connected. For
example, both devices must be
configured to use automatic
negotiation, or both configured with
fixed and matching speed and
duplex settings (see below).
Manual configuration
Speed
Identifies the connection speed: 10 Mbit/s or 100
Mbit/s. Use automatic negotiation if a connection
speed of 1000 Mbit/s is required.
The connection speed must match
that of the device to which this port
is connected.
You only need to select this option if
you have chosen manual Ethernet
settings, as described above.
Duplex
Identifies the connection duplex mode:
Full duplex
Both devices can send data to each
other at the same time
Half duplex
Only one device can send to the other at
a time
The duplex setting must match that
of the device to which this port is
connected.
You only need to select this option if
you have chosen manual Ethernet
settings, as described above.
Ethernet status
Field Field description Usage tips
Link status
Indicates whether this Ethernet port is connected
to or disconnected from the network.
Speed
The speed (10/100/1000 Mbit/s) of the network
connection to the ISDN Gateway on this port.
This value is negotiated with the
device to which this port is
connected or based on your Manual
configuration selected above.
Duplex
The duplex mode (full duplex or half duplex) of
the network connection to this port.
This value is negotiated with the
device to which this port is
connected or based on your Manual