Filter
Top Products
Displaying ISDN status
Cisco TelePresence ISDN Gateway 2.1 Online help (Printable format) 96 of 135
Displaying ISDN status
The ISDN status page displays an overview of the current state and configuration of the ISDN ports.
To display ISDN status, go to Status > ISDN.
Information is shown in a table, with one row per physical port of the ISDN Gateway. Refer to the table
below for details of the information displayed in each row.
Field
Field description Usage tips
Port
The number of the port to which this
information relates.
State
Whether or not this port is enabled.
A port may be disabled because it is not
supported by the particular model of
ISDN Gateway, because the port is not
applicable or not licensed or because it
has been explicitly disabled by the user
(see
Configuring ISDN ports settings).
Note that for ISDN GW blades the
number of licensed ports depends on
the number of PRI port licenses
allocated to the blade.
Layer 1
Shows up when the physical layer is
connected. Shows down otherwise.
Layer 2
Shows up when the D-channel is
connected to, and has established
communication with, the ISDN network.
Shows down otherwise.
If the ISDN Gateway is in leased line
mode, there will be no layer 2 status.
Type
The interface type configured for this port.
To change the interface type, see
Configuring general ISDN settings.