Filter
Top Products
Shutting down and restarting the Cisco TelePresence ISDN Gateway
Cisco TelePresence ISDN Gateway 2.1 Online help (Printable format) 94 of 135
Shutting down and restarting the Cisco
TelePresence ISDN Gateway
It is sometimes necessary to shut down the Cisco TelePresence ISDN Gateway, generally to restart
as part of an upgrade (see
Upgrading and backing up the ISDN Gateway). You should also shut down
the ISDN Gateway before intentionally removing power from it.
Shutting down the ISDN Gateway will disconnect all active calls.
To shut down the ISDN Gateway:
1. Go to Settings > Shutdown.
2. Click Shut down ISDN Gateway.
3. Confirmation of shutdown is required; the button changes to Confirm ISDN gateway
shutdown.
4. Click again to confirm.
5. The ISDN Gateway will begin to shut down. The banner at the top of the page will change to
indicate this.
When the shutdown is complete, the button changes to Restart ISDN gateway.
6. Click this button a final time to restart the ISDN Gateway.