Filter
Top Products
Task 5Setting Up a Web Portal for the Dial NMS
About HTTP Access to the CLI
&%
Basic Dial NMS Implementation Guide
Step 2
Create a table in an HTML web page and enter your list of frequently used Cisco IOS CLI commands.
Note
To create the link for a CLI command, specify the IP address of the Cisco IOS
device followed by the command. Remember to include the forward slashes (/)
between each command mode and key word.
The web page can include many types of commands useful for managing a dial Internet access service,
including:
System commands (Table 26)
Interface commands (Table 27)
Call state commands (Table 28)
Debug commands (Table 29)
Table 25 Formula and Example for Linking a CLI Command
Formula Example
http://ip-address/exec/ios-key-word/.../cr http:/172.23.84.20/exec/sh/caller/cr
Table 26 System Commands
show running configuration show file systems show ip route
show version dir show ip route static
show modem version show flash show ip route connected
Table 27 Interface Commands
show controller t1 show ip interface brief show interface Fast
Ethernet0/0/0
show isdn service show interface show line
show isdn status