Filter
Top Products
62 4025083 Rev A
Manage the Gateway
Select the Diagnostics tab to open the Administration Diagnostics page.
Use the descriptions and instructions in the following table to configure the
diagnostics feature on the gateway. After you make your selections, click Save
Settings to apply your changes or Cancel Changes to cancel.
Section
Field Description
Ping Test
Ping Test Parameters
Ping Target IP
The IP address that you want to ping.
Ping Size
The size of the packet you want to use.
Number of Pings
The number of times you wish to ping the target device.
Ping Interval
The time period (milliseconds) between each ping.
Ping Timeout
The desired time period (milliseconds) of the timeout. If no
response is received within this ping period, the ping test is
considered a failure.
Start Test
To start a test, complete the following steps.
Click Start Test to begin the text. A new page opens and
displays a summary of the test results.
Click the Save Settings to save the test results or click Cancel
Changes to cancel the test.
Administration > Backup & Restore
Administration Backup & Restore allows you to back up you configuration of the
Gateway and store it on your computer. You can use this file to restore a previously
saved configuration for your Gateway.