Cisco Systems DPC3827 Network Router User Manual


 
4025083 Rev A 71
Monitor Gateway Status
Section
Field Description
Current Software Revision
Displays the revision version of the firmware.
Firmware Name
Displays the name of the firmware.
Firmware Build Time
Displays the date and time the firmware was built.
Cable Modem Status
Displays one of the possible current states of the gateway.
Downstream
Channels
Channels 1-8
Displays the power level and the signal to noise ratio of the active
downstream channels.
Upstream
Channels
Channels 1-4
Displays the power level of the active upstream channels.
Status > DOCSIS Signal
Important: This page is only visible until the gateway goes online. After the gateway
is online and registered on the network, this page is no longer visible.
Important: Once the gateway is online, the remaining status can only be accessed by
an authorized service technician.
The DOCSIS Signal Status page displays a detailed status report of the DOCSIS
signal for each of the downstream and upstream channels.
The downstream channels section reports the status of the following items:
Channel ID
Downstream Frequency
Modulation
Power Level
Signal-to-Noise Ratio
The upstream channels section reports the status of the following items:
Channel ID
Upstream Frequency
Modulation
Bit Rate