Filter
Top Products
Send documentation comments to nexus5kdocs@cisco.com.
1-4
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 1 Overview
Cisco Nexus 5500 Platform Switches
The rear of the Cisco Nexus 5596UP chassis, shown in Figure 1-3, has 48 fixed 10-Gigabit Ethernet data
ports on the bottom and three slots for optional expansion modules on top.
Figure 1-3 Rear View of the Cisco Nexus 5596UP Switch
Note The L1/L2/Mgmt1 ports are not usable. They are disabled at this time.
Expansion Modules
Expansion modules allow the Cisco Nexus 5596UP switch to be configured as cost-effective 10-Gigabit
Ethernet switches and as I/O consolidation platforms with native Fibre Channel connectivity.
The Cisco Nexus 5596UP switch has three slots that can be used for the following optional expansion
modules:
• 4-port QSFP expansion module
• 16-port Universal (Fibre Channel and Ethernet) GEM (N55-M16UP) that provides 8-, 4-, 2-, or
1-Gbps Fibre Channel and 1- or 10-Gigabit Ethernet ports
1 Internal cross-connect ports 4 Network management port
2 Link LED (left LED) 5 Console port
3 Activity LED (right LED)
1 Expansion modules, shown here with three
16-port Universal GEM2 modules (can also
have Layer 3 GEM2 modules)
3 System status LED
2 Identifier LED 4 48 fixed 1- and 10-Gigabit Ethernet ports