Filter
Top Products
10-9
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 10 Configuration Tasks and Troubleshooting Information
NSE-1 show Commands
Using the show pxf interface Command
The show pxf interface command provides a summary of the interfaces in the router and which PXF
features or capabilities are enabled on these interfaces. The following is an example of the
show
pxf interface command:
Router# show pxf interface
Intf I/f # Attributes
Fa0/0 3 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 101)
Et1/0 4 Raw, Encap
Et1/1 5 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 13)
Et1/2 6 Raw, Encap
Et1/3 7 Raw, Encap
Se2/0 8 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
Se2/1 9 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
Se2/2 10 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
Se2/3 11 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
Fa3/0 12 Raw, Encap
PO4/0 13 Raw, Encap
AT5/0 14 Raw, Encap
Using the show pxf feature ? Command and Subcommands
The following is an example of the feature-specific show pxf feature ? command with sample output:
Router# show pxf feature ?
cef PXF CEF info
nat PXF NAT info
• show pxf feature cef ?
display pxf entry
Router# show pxf feature cef entry
Shadow 16-4-4-8 PXF Mtrie:
41 leaves, 1968 leaf bytes, 15 nodes, 267000 node bytes
5 invalidations
46 prefix updates
refcounts: 66746 leaf, 66720 node
Prefix/Length Refcount Parent
0.0.0.0/0 62282
0.0.0.0/32 3 0.0.0.0/0
171.69.12.128/27 34 0.0.0.0/0
171.69.12.128/32 3 171.69.12.128/27
171.69.12.129/32 3 171.69.12.128/27
171.69.12.130/32 3 171.69.12.128/27
171.69.12.131/32 3 171.69.12.128/27
171.69.12.132/32 3 171.69.12.128/27
171.69.12.138/32 3 171.69.12.128/27
171.69.12.139/32 3 171.69.12.128/27
171.69.12.140/32 3 171.69.12.128/27
171.69.12.141/32 3 171.69.12.128/27
171.69.12.142/32 3 171.69.12.128/27
171.69.12.143/32 3 171.69.12.128/27
171.69.12.145/32 3 171.69.12.128/27
171.69.12.146/32 3 171.69.12.128/27
171.69.12.147/32 3 171.69.12.128/27
(display text omitted)