Filter
Top Products
9
Configuration Using the Console Interface
48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet
Chapter 4
Versions
The Versions screen displays the Boot Version, Software
Version, Loader Version and the Hardware Version.
Versions
Boot Version This file runs when the Switch is turned on.
It performs power-on diagnostics and loads the operating
system for the Switch.
Software Version This file contains the programming
code that runs the Switch.
Loader Version This file loads the software from storage
memory to main memory.
Hardware Version The current hardware setup of the
Switch.
General Information
The General Information screen displays the System
Description, System Up Time, System Mac Address, System
Contact, System Name and System Location.
General Information
Management Settings
The Management Settings screen displays the Serial Port
Configuration.
Management Settings
Serial Port Configuration
The Serial Port Configuration screen displays the current
setting for the baud rate. The baud rate can be changed by
selecting Edit then using the spacebar to toggle through
the different baud rates. Use the Save action to set the
new baud rate.
Serial Port Configuration
User & Password Settings
The User & Password Settings screen displays user account
information on the Switch. The default account is the
admin account. To add a new user, use the arrow keys to
select Edit and then press the Enter key, then enter the
user name of the new account and assign a password to
the account. The password must be re-entered into the
Again Password column to confirm the password.
User & Password Settings