Filter
Top Products
Chapter 5
Configuring the Switch
54
48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet
Enter the file name of the software or use the Browse
button to locate the file on the PC, then click Save
Settings.
Admin > Reboot
Restarts the Switch retaining the current configuration
settings.
Admin > Reboot
Click the Reboot button, then click OK to confirm.
Admin > Factory Default
Restores the Switch’s factory default settings.
Admin > Factory Default
Click the Reset to Factory Default Configuration button,
then click OK to confirm and restart the Switch.