Filter
Top Products
— 9 —
ENGLISH
1. GENERAL OUTLINE
The CBM1000 Type II is a compact thermal line printer designed for use with a broad
array of terminal equipment including data, POS, and kitchen terminals.
With extensive features, it can be used in a wide range of applications.
To obtain the best results from the CBM 1000 Type II printer, please read the
instructions this manual thoroughly.
1.1 Features
●Paper drop-in mechanism. Supply/replace paper rolls by simply dropping a paper
roll into the printer and closing the cover. Greatly facilitates paper handling and
head cleaning.
●Ease of paper threading and head cleaning.
●High speed (150 mm/s), and low-noise thermal printing.
●Front-side paper ejection method. Allows printer installation and use anywhere
with few restrictions.
●Hermetic covering structure. Protects foreign matter or liquid from entering the
printer.
●Built-in input buffer.
●Barcode Printing. Made possible using special commands.
●Page mode. Now you can arrange pages freely.
●Registration of user-defined characters and logos into flash memory.
●Built-in drawer kick-out interface.
●Auto cutter mechanism provided as a standard unit.
●Two types of power supply. Select between an easy-to-handle, built-in power
supply type and lightweight flat AC adapter type.
●Can use 58 mm wide paper rolls by employing the supplied partition.
1.2 Unpacking
When unpacking the printer, confirm that the following are provided:
Printer
Sample paper roll
Partition
AC adapter
(provided with the A type only)
AC power cord
(not supplied with Type D)
User’s manual
CAUTION
• Do not use the printer in an environment where condensation can occur. If condensation
forms, leave the power off until it completely evaporates.