Filter
Top Products
— 18 —
ENGLISH
1 POWER lamp (Green)
Lights when the power is turned on. It blinks when
a memory check error has occurred.
2 ERROR lamp (Red)
Lights or blinks to show different error states. It
also blinks while the printer is waiting for a macro
to be executed.
3 FEED switch
Pressing this switch briefly causes one line of
paper feeding.
While a macro is waiting to be executed, pressing
the switch causes the macro to be executed.
4 Buzzer
A buzzer sound alerts the operator to an error.
3.9 Operation Panel and Error Indication
POWER lamp (Green)
ERROR lamp (Red)
FEED switch
Error indication POWER lamp ERROR lamp Buzzer Recovery method
Memory Check
error
Quick blinking Lights — Not recoverable
Cover open Lights Lights
(Four short beeps)
×
2
Close the cover.
Head overheat Lights
Slow blinking
—
Recovers automatically
when the temperature
returns to normal.
Lights Lights —
Set a new paper
roll.
Paper end Lights Lights
Set a new paper
roll.
Cutter motor lock Lights
Quick and slow blinking
Remove paper
jams.
Macro execution
wait
Lights
Slow blinking
—
Press the FEED
switch.
Low voltage error Lights — Not recoverable
High voltage error Lights — Not recoverable
Waiting for label
cutter action
Off —
Press the FEED
switch.
Waiting for label
discharge
Off —
Remove label from
peeler.
Label detection
error
Off
Slow blinking
Set the specified
label roll.
POWER
ERROR
FEED
Quick and slow blinking
Slow blinking
(Four short beeps)
×
2
Three long beeps
Three long beeps
Paper near-end
Lights