Filter
Top Products
2-5
2.6 System Maintenance Mode
The printer enters the system maintenance mode when the Pause, Feed and
Stop keys are pressed and held down simultaneously while turning the printer on.
If those keys are pressed further for five seconds after the printer has entered the
system maintenance mode, the system will be reset and the settings in the
backup memory will be reset to the following default values:
• RS-232C communication setting
Baud rate: 9600 bps
Data length: 8 bits
• Print mode setting
Print mode: Thermal-transfer printing
• Optional function setting
Peeler: OFF
Cutter: OFF
Ejector: OFF
• Paper sensor type setting
Sensor: Transparent type (paper gap detection)
• Compatible model setting
Native: ON
[Functions]
Set the RS-232C communication parameter and enter the paper sensor
sensitivity adjustment mode.
• Selects the mode when the Pause key is pressed.
• Selects the mode item when the Feed key is pressed.
• Stores the selected settings in the backup memory when the Stop
key is pressed and the printer comes on-line.
Item LCD indication
↓
Baud rate 9600bps → 19200bps →38400bps …… 4800bps →
↓
Data length 8 bits → 7 bits →
↓
Native NativeON→ NativeOF →
↓
Voltage setting PE∗.∗∗V → BL∗.∗∗V→