Filter
Top Products
6-14
• The paper is fed to the tear position
Tear-off function will start if no data
is sent for 0.5 second after printing
Paper is fed to the position where
manual tearing is possible
• When manual tearing is needed, tear the label at this time.
• Performs next label printing.
When next print data is transmitted from the computer, the printer
feeds back paper to the previous print completed position and
resumes printing.
Paper is fed back to the previous
print completed position and
printing resumes
6.5.3 Tear-off when feeding
• If no print data is transmitted for 0.5 second after feeding, the tear-off
function will start. If the Feed key is pressed again before starting
the tear-off function, the printer will start feeding without tear-off
function.
• Paper is fed to the tear position
• When manual tearing is needed, tear the label at this time.
• The printer performs the next feeding or label printing.
If the Feed key is pressed or next print data is transmitted from the
computer, the printer feeds back paper to the previous print
completed position and resumes feeding or printing.
Peeling (manual tearing)
Platen
Paper position sensor
Print head