Filter
Top Products
40
Printer Settings
Remarks
Selects the QR Code
separation function: Mode 1
where the user separates the
data and Mode 2 where the
printer separates the data.
Selects image generation
speed
Sets the time until energy
saving starts. Or it can be set
to invalid.
Function that cancels auto
power off, during infrared
linking.
Sets black mark detection
printing.
If this setting is valid, a
response is sent to the FSg of
the ESC command and to the
ESC
˜
Y command (command to
return the status of the printer
to the host).
If the printer is a Bluetooth
version, the Bluetooth interface
is selected in the factory.
When set to Valid, the serial
interface will take priority when
the cable is connected and the
printer power is ON.
Selects communication speed.
(Valid only for RS232C
interface.)
Initial values
mode 1
Normal
3 min
Invalid
Invalid
Invalid
IrDA
Bluetooth*
Valid
9600
Setting range
mode 1
mode 2
Normal
Fast
3 min
5 min
10 min
Invalid
Invalid
Valid
Invalid
Valid
Invalid
Valid
Bluetooth
Cable IF
IrDA
(Infrared Standard)
IrCZ (Infrared Citizen)
USB
Invalid
Valid
600, 1200
2400, 4800
9600, 19200
38400, 57600
115200
Top Menu
Printer
Settings
System
settings
Interface
settings
Setting the Modes
Sub Menu
QR division mode
Image generation
speed *
1
Low power time
Link off *
2
Black mark
detection
Return control
Interface selected
Cable IF auto
detection
Cable IF baudrate