Filter
Top Products
PPU-231 User’s Manual
28
CITIZEN
6.3 Input and Output Signals
6.3.1 Input and Output Signals
(1) Input signals to the printer
• DATA : 8-bit parallel signal (Active: “High”)
• STROBE : Strobe signal to read the 8-bit data (Active: “Low”)
• RESET : Signal to reset the entire printer (Active: “Low”); 1 ms or more
(2) Output signals from the printer
• ACK : 8-bit data request signal. A pulse signal to be output at the end of the BUSY signal
(Active: “Low”)
• BUSY : Signal to indicate that the printer is busy. Input new data when it is "Low."
(Active: “High”)
• FAULT : Turned to "Low" when the printer has an alarm. At this time, all the control circuits in
the printer stop. (Active: “Low”)
• PE : Output if the printing paper has run out or is running out. (Active: “High”)