Filter
Top Products
CBM-230/231 User’s Manual
39
CITIZEN
(19) Setting of paper near end sensor available for print stop (ESC c 4 n)
Code : [1B]h + [63]h + [34]h + n
*{0≤ n ≤ FF} The data is described with the hexadecimal code.
Specifying the condition of paper near end sensor to stop printing operation.
• Only the lowest bit (n0) is effective for "n".
• The bit of "n" has the followings meaning.
n0 Type
0 Paper near end disabled
1 Paper near end enabled
• An initial value of "n" is specified by the DIP switch (DS1-5).
(20) Enabling/disabling the panel switch (ESC c 5 n)
Code : [1B]h + [63]h + [35]h + n
*{0≤ n ≤ FF} The data is described with the hexadecimal code.
Selecting the panel switch enable or disable.
• Only the lowest bit (n0) is effective for "n".
• The bit of "n" has the followings meaning.
n0 Type
0 LF switch enabled
1 LF switch disabled
• The initial value of n is "0".