Filter
Top Products
CBM-230/231 User’s Manual
46
CITIZEN
(31) Selecting Bar Code width (GS w n)
Code : [1D]H + [77]H + n
*{2≤ n ≤ 4} The data is described with the hexadecimal code.
Selects the horizontal size of the bar code.
• An initial value of the horizontal size is "3".
(32) Selecting the height of the bar code (GS h n)
Code : [1D]H + [68]H + n
*{1≤ n ≤ FF} The data is described with the hexadecimal code.
Selects the height of the bar code.
• "n" denotes the number of dots in the vertical direction.
• An initial value of "n" is "162".
(33) Selecting Printing Position of HRI Characters (GS H n)
Code : [1D]H + [48]H + n
*{0≤ n ≤ 3} The data is described with the hexadecimal code.
Selectis the printing position of the HRI characters when printing the bar code.
• "n" has the following meanings.
n (Hex) Printing Position
0 No printing
1 Above the bar code
2 Below the bar code
3 Both above and below the bar code
• The HRI characters are printed in the font selected by GS f.
• An initial value of "n" is "0".