CBM-230/231 User’s Manual
40
CITIZEN
(21) Printing and feeding the paper by n-lines (ESC d n)
Code : [1B]h + [64]h + n
*{0≤ n ≤ FF} The data is described with the hexadecimal code.
Prints the data in the print buffer and feeds the paper by n-lines.
• A set rate does not remain.
• The beginning of the line is assumed to be the next printing start position.
(22) Generating the specified pulses (ESC p m n1 n2)
Code : [1B]h + [70]h + m + n + n2
* {m = Connector pin number (refer to the table below)}
{0 ≤ n1 ≤ FF}
{0 ≤ n2 ≤ FF} The data is described with the hexadecimal code.
The signals specified by n1 and n2 are output to the connector pin.
• The bit of "m" (m0) has the followings meanings.
m0 Type
0 Drawer kick pin No. 2
1 Drawer kick pin No. 5
• TheONtimeisn1× 2 ms, and OFF time as n2 × 2ms.
• When "m" is beyond a defininication range, n0 signal is output, discarding n1 and n2.
• A drawer drive duty is as follows.
(Take OFF time should be 4 times or more longer than the ON time.)
ON Time
On time + OFF time
≤ 0.2