– 11 –
4.3 Removing the ribbon cassette
Use the following procedure to remove the ribbon cassette from the slip printer
when you want to replace it with a new one.
❏ Make sure that the printer is turned off and unplugged from its power
outlet.
❏ Remove the printer cover.
❏ Grasping the ribbon cassette as shown, gently pull it away from the printing
mechanism.
❏ Use the procedure under “Installing the ribbon cassette” on page 9 to install
a new cassette.
4.4 Connecting to a power outlet and turning power on and off
❏
Make sure that the printer is turned off.
❏ Plug the AC adapter that comes with the printer into the printer’s AC
adapter cable connector.
❏ Connect a three-prong grounded power cord to the power cord connector of
the AC adapter.
Note:
The printer does not come with a power cord, so you must provide one yourself.