Filter
Top Products
– 64 –
ESC p m t1 t2
[Function] Generates Specified Pulses
[Code] ASCII ESC p m t1 t2
Hexadecimal 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range] m = 0, 1, 48, 49
0 Ϲ t1Ϲ 255
0 Ϲ t2 Ϲ 255
[Outline] This command outputs the signal specified with t1 or t2 to the connector pin m.
• The following table lists the types of m.
• The ON time shall be t1 × 2 mS and OFF time t2 × 2 mS, respectively.
[Caution] If m goes beyond the range, this command will be ignored, processing the subsequent data as
normal data.
[See Also] 5.3 Memory Switch Settings, 7. Peripheral Unit Driver Circuit
m Connector Pin
0, 48 Drawer kick connector No. 2 pin
1, 49 Drawer kick connector No. 5 pin