Filter
Top Products
– 61 –
ESC c 4 n
[Function] Selects No-paper Sensor Valid for Print Stop
[Code] ASCII ESC c 4 n
Hexadecimal 1B 63 34 n
Decimal 27 99 52 n
[Range] 0
Ϲ
n
Ϲ
255
[Outline] • This command selects in which status of the no-paper Sensor printing should be stopped.
Each bit has the following different meanings.
[Caution] • It is possible to select multiple sensors as a printing stop condition, but if any one of them
detects the no-paper condition, the printer will stop printing.
• The printer stops printing after printing the on-going line and feeding the paper. If the panel
switch is disabled at this time, the printer will release the paper automatically and waits for
new paper to be set.
[Default] n = 0
[See Also] ESC c 5
Bit Sensor Hexadecimal Decimal
0 Undefined ––
1 Undefined ––
2 Undefined ––
3 Undefined ––
4 TOF sensor disabled 00 0
TOF sensor enabled 10 16
5 BOF sensor disabled 00 0
BOF sensor enabled 20 32
6 Undefined ––
7 Undefined ––