– 42 –
CAN
ESC SP n
[Function] Cancels Print Data in Page Mode
[Code] ASCII CAN
Hexadecimal 18
Decimal 24
[Outline] This command erases all the print data in the current print area in the page mode.
[Caution] • This command is valid only in the page mode.
• Even the print data in the previously set print area is erased, if it is extended over the
currently set print area.
[See Also] ESC W
[Function] Sets Space Size to Right of Characters
[Code] ASCII ESC SP n
Hexadecimal 1B 20 n
Decimal 27 32 n
[Range] 0
Ϲ
n
Ϲ
32
[Outline] This command sets the right space size of the characters.
[Caution] • In the double width mode, the right space size is doubled.
• The space size is set in increments of half dot.
• In the page mode, the space size may be shifted a half dot from a set value.
• There are two set values for the standard and page modes, respectively.
[Default] n = 0