Citizen Systems CBM-820 Printer User Manual


 
– 52 –
ESC = n
[Function] Selects Peripheral Device
[Code] ASCII ESC = n
Hexadecimal 1B 3D n
Decimal 27 61 n
[Range] 0 Ϲ n Ϲ 3
[Outline] This command selects a peripheral device which validates the subsequent data, depending on
a value of n.
Each bit has the following different meanings.
If Printer Disabled has been selected, the printer will discard all the received data until Printer
Enabled is selected with this command.
[Caution] Even if Printer Disabled has been selected, the printer may be made off-line by operating it.
[Default] n = 1
Bit Peripheral Device Hexadecimal Decimal
0 Printer Disabled 00 0
Printer Enabled 01 1
1 Undefined
2 Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7 Undefined