Filter
Top Products
– 59 –
ESC T n
[Function] Selects Character Print Direction in Page Mode
[Code] ASCII ESC T n
Hexadecimal 1B 54 n
Decimal 27 84 n
[Range] 0
Ϲ
n
Ϲ
3, 48
Ϲ
n
Ϲ
51
[Outline] This command specifies the character printing direction and start point in the page mode. The
character printing direction is specified with n.
n = 0, 48 :
→
(Start point at upper left: A)
n = 1, 49 :
↑
(Start point at lower left: B)
n = 2, 50 :
←
(Start point at lower right: C)
n = 3, 51 :
↓
(Start point at upper right: D)
[Caution] • If the printing direction is specified or changed, the subsequent characters will have different
printing direction and start point(upper left, lower left, lower right, or upper right), depending
on a value of n.
• Only setting is valid in the standard mode.
• If n is beyond the range, this command will be ignored.
[Default] n = 0
A
→→→→→→→
D
→→→→→→→
C
→→→→→→→
B
→→→→→→→
Paper Feed Direction