Filter
Top Products
14. PRINT CONTROL FUNCTIONS
14.1 CBM Mode
14.1.1 Command List
Command Function Code Page
1 FF n n-line paper feed (CBM1 mode) 0CH n 40
2 FF CBM2: Form feed (CBM2 mode) 0CH 40
3 SO (Note) Specifying the double width character 0EH 41
4 SI (Note) Canceling the double width character 0FH 41
5 LF Printing and paper feed 0AH 41
6 CR Printing 0DH 41
7 DC 1 (Note) Initializing the printer 11H 42
8 DC 2 (Note)
Specifying/Canceling the Inverted character
12H 42
9 DC 3 (Note) Specifying the red print 13H 44
10 CAN Canceling the print data 18H 45
11 ESC * n1 n2 Specifying the bit image mode 1BH 2AH n1 n2 46
12
ESC − n
Specifying/Canceling the Underline 1BH 2DH n
46
13 ESC 1 Specifying 1/9-inch line feed width 1BH 31H 47
14 ESC 2 Specifying 2/9-inch line feed width 1BH 32H 47
15 ESC 3 Specifying standard line feed width 1BH 33H 47
16 ESC C n Setting the page length 1BH 43H n 47
17 ESC N n Specifying the perforation skip 1BH 4EH n 49
18 ESC O Canceling the perforation skip 1BH 4FH 49
19 ESC f 1 Form feed (Changing the page) 1BH 66H 01H 49
20 ESC t n Selecting the character code table 1BH 74H n 50
21 ESC BEL n1 n2
Setting the external device drive pulse width
1BH 07H n1 n2 51
22 BEL Driving command A for Drawer-1 07H 51
23 FS Driving command B for Drawer-1 1CH 52
24 SUB Driving command for Drawer-2 1AH 52
25 RS Buzzer-on 1EH 52
26 ESC P 0 Full cut 1BH 50H 00H 53
27 ESC P 1 Partial cut 1BH 50H 01H 53
28 ESC R n Selecting the international character set 1BH 52H n 53
29 ESC & 0 n1 n2 Defining the download character set
1BH 26H 00H n1 n2
54
30 ESC % n
Specifying/Canceling download character set
1BH 25H n 55
31
ESC ⁄ n
Definition the message 1BH 2FH n
55
32 ESC DC3 n Printing the message 1BH 13H n 56
33 ESC y n
Setting the print lines after paper near end
detection
1BH 79H n 56
34 ESC DC2 n1 n2
Deleting the download character, message, bit
image
1BH 12H n1 n2 57
35
GS ∗ n1 n2
Defining the download bit image 1DH 2AH n1 n2
58
36
GS ⁄ m
Printing the download bit image 1DH 2FH m
59
Note: Effective when CBM mode is selected with the DIP switch segments 1-9 and 1-10 and CMB1 (OFF) is