24
7 If the Paper is Not Loaded Straight
Slide the cover OPEN button to open the cover, then adjust the paper by hand.
After confirming that the paper is completely straightened, securely close the cover.
7 When Printing is Finished
When you have finished printing using the roll paper, slowly pull back the printed paper
at an angle along the paper cutter, allowing you to cut it from the roll.
Do not touch the paper
cutter. This may result in
injury to your hand or
whatever part of your
body comes into contact
with the cutter.
Do not allow the printed paper to enter the single sheet (cutsheet)
insertion slot.
Loading the Paper