Filter
Top Products
33
Category Specification
Print Columns
Character Font Dot Matrix Sizes
Barcodes
Print Paper
1) Paper Feed Method
2) Media Width
3) Paper Path
4) Media Types
5) Recommended Papers
Interfaces
IrDA Interface
Serial Port
IR Transfer Range
Input Buffer Size
LED Color
21 columns (10 CPI), 25 columns (12 CPI),
32 columns (15 CPI), 36 columns (17 CPI)
18 H x 24 V (10 CPI), 15 H x 24 V (12 CPI),
12 H x 24 V (15 CPI), 10.5 H x 24 V (17 CPI)
UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), ITF, CODABAR,
CODE39, CODE128
Friction Feed
58 mm (2.28 in.)
Rear (Clamshell)
Single Sheet (Cut Sheet)/
Continuous 1-sheet or copy paper (original + 1 sheet)
(only folded paper supported for continuous transfer paper)
1-sheet Paper: TF50KS-E2C (Nippon Seishi)
Copy Paper: TLC#25 Black (Naigai Carbon Ink)
Special Labels: HW54S (Nippon Seishi)
• Paper Roll Diameter:
Maximum outer diameter φ30 mm (φ1.18 in.)
Minimum diameter for starting roll φ8 mm (φ0.32 in.)
* Do not fold back or apply adhesives to paper rolls ends
Optical Interface <IrDA 1.0>
Serial Port <RS-232C> Special Cable (optional)
Transfer Rate: 115200 bps (maximum)
Transfer Rates: 4800, 9600, 19200, 38400, 57600, 115200 bps
Parity: Even, Odd, No
Data Length: 7- or 8-bit
Stop bit: 1- or 2-bit
Figures apply with printer and computer ports on-axis and directly
facing each other, with the computer IR port within a vertical and
horizontal angle ±15° from center
IrDA: Maximum 60 cm (approx. 2 ft.) (may vary according to the
computer and environmental conditions; see p. 18)
64 KB
POWER LED: Green ERROR LED: Red
0
–1
0
–0.04