Citizen Systems PD-22 Printer User Manual


 
31
Optional AC Adaptor Kit
Installing the Battery Adaptor
Battery adaptor
Battery adaptor
Align
1
2
1 Remove the battery cover from the printer.
(Remove batteries if there are any loaded.)
2 Push in the battery adaptor as shown in the figure.
3 Connect the AC adaptor cord.
4 Attach the battery adaptor cover.
Notes:
This kit is for use with this printer only. You cannot use it with other products.
Be sure to insert the battery adaptor before connecting the AC adaptor.
When the AC adaptor is connected, there is voltage at the battery adaptor’s terminals.
Do not create a short between the two terminals.
When using batteries, be sure to use the original battery cover.
Notes:
• Do not create a short between the
twoterminals.
• Be careful not to insert incorrectly.