Filter
Top Products
25
1 Turn the printer on.
• Confirm that the roll paper cover is
closed.
• The ERROR LED blinks if no paper is
set in the printer.
2 Insert the paper as shown in the
figure, by feeding the end of a
single sheet into the single sheet
insertion slot.
• The printer automatically takes up
about 15 mm (0.6 inch) of the
paper, the ERROR LED goes off, and
the unit is ready for printing.
Feeding Single Sheets (Cutsheets)
7 Use of the following single (cut) sheet paper is recommended.
Normal thermal paper (1 sheet type): TF50KS-E2C (Nippon Seishi)
Copy thermal paper (2 sheet type): TLC#25 Black (Naigai Carbon Ink)
Special Labels: HW54S (Nippon Seishi)
The paper is loaded automatically when the internal setting
controlling the automatic paper feed is set to “ON.”
Make sure the cover is fully and securely closed.
Loading the Paper