Filter
Top Products
12
a. Enter a name for the new SR and the name of the share where it is located. Click Scan to have the
wizard scan for existing NFS SRs in the specified location.
Note:
The NFS server must be configured to export the specified path to all XenServer hosts in the
pool.
b. Click Finish.
The new SR appears in the Resources pane, within the pool.
3. If you choose iSCSI:
a. Enter a name for the new SR and then the IP address or DNS name of the iSCSI target.
Note:
The iSCSI storage target must be configured to enable every XenServer host in the pool to
have access to one or more LUN(s).
b. If you have configured the iSCSI target to use CHAP authentication, enter the User and Password.
c. Click the Discover IQNs button, and then choose the iSCSI target IQN from the Target IQN list.
Warning:
The iSCSI target and all servers in the pool must have unique IQNs.
d. Click the Discover LUNs button, and then choose the LUN on which to create the SR from the Target
LUN list.
Warning:
Each individual iSCSI storage repository must be contained entirely on a single LUN, and may
not span more than one LUN. Any data present on the chosen LUN will be destroyed.
e. Click Finish.
The new SR appears in the Resources pane, within the pool.
The new shared SR now becomes the default SR for the pool.