Filter
Top Products
SETUP
Setting Description Example
RECALIBRATE If a label travels the No Media Timeout
distance without seeing an index
mark, the printer will attempt to
recalibrate the printer if
RECALIBRATE: ON. If
RECALIBRATE: OFF, the printer will
error out with a red ready light.
RECALIBRATE: ON
PRINT MODE DT indicates direct thermal printing,
TT indicates thermal transfer printing
and AUTO indicates automatic print
mode switching. In AUTO mode, the
printer will check for the presence of a
ribbon when it is turned on or when
you lower the printhead. If it detects a
ribbon it will set itself for TT mode,
otherwise it will automatically select
DT mode.
PRINT MODE: DT (AUTO)
ERROR REPORT LEVEL Displays current setting for error
reporting
ERROR REPORT LEVEL: 0
NO MEDIA TIMEOUT Distance (in inches) the label travels
before the printer either attempts to
recalibrate, or errors out with a red
ready light. (Gap indexing mode only)
NO MEDIA TIMEOUT: 0
EMULATION MODE Displays status of Blazer Emulation
Mode. A value of 0 sets the default
print pitch to its highest value.
EMULATION MODE: 0
IMAGE BUFFER Available free space in the image
buffer
IMAGE BUFFER: 1903911 bytes free
MEM SLOT 3 Amount of space in Flash RAM for
stored objects
MEM SLOT 3: 3670016 bytes installed
MAC ADDRESS Hardware address of the printer 00:E0:70:00:00:00
IP ADDRESS Network address 255.255.0.0
GATEWAY Network gateway address 0.0.0.0
SNMP TRAP IP Address for the network SNMP trap 0.0.0.0
LPD Displays status of LDP protocol LPD: ON
Telnet Displays status of Telnet protocol Telnet: ON
BootP Displays status of BootP/DHCP BootP: OFF
RTEL Displays status of RTEL protocol RTEL: ON
Ethernet TXTBFR Displays the size of the text and
overflow buffers
Ethernet TXTBFR: Size=8192 Ovf=1514
Copyright © 2004, Cognitive. 17