Filter
Top Products
PROGRAMMING
!RFID LEDTIME
Function Regulates the interval of LED illumination and
LED OFF time used in generation of an LED Flash
on ‘Success’ or ‘Failure’.
Explicit Form
!RFID LEDTIME nn
Parameters
nn
Determines the LED illumination
interval. Range is 0 to 65535.
Response No specific response
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID LEDTIME 100
!RFID ?
From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
Mark/OverRide State: OFF
VOID Stamp Message: <NoStampMsg>
LED Flash Control: ON
LED Flash Duration: 250 MSecs
SelecTag before Cmd: ON
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 56