Filter
Top Products
PROGRAMMING
!RFID VOID
Function This command instructs the printer to use this
specified ASCII string to stamp or print on failing
RFID-Tags if and only if !RFID MARK ON is
selected.
Explicit Form
!RFID VOID “ASCII-String-to-Stamp-Bad-
Tags”
Parameters
“ASCII-
String-to-
Stamp-Bad-
Tags”
Text string to stamp or print on
failed tags. String must be 0-240
characters in length.
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID VOID “<<<BAD RFID TAG>>>”
!RFID MARK ON
!RFID ?
From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
Mark/OverRide State: ON
VOID Stamp Message: <<<BAD RFID TAG>>>
LED Flash Control: ON
LED Flash Duration: 250 MSecs
SelecTag before Cmd: ON
| | |
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 65