Filter
Top Products
PRINTING RFID TAGS
5. In the Command window, at the prompt, type edit and press
ENTER. The DOS Editor window appears.
6. In the DOS Editor window, type the commands and data to
be sent to the printer.
NOTE: If you are using a printer with a serial port (COM port), it may be
necessary to save the file and print directly from the Command window. Refer
to Stored Formats.
7. On the File menu, choose Print.
8. In the Print dialog, verify that the Complete document option
is selected. Then, click OK. The label is sent to the printer.
Copyright © 2004, Cognitive. 31