Filter
Top Products
PROGRAMMING
!RFID TAGTYPE
Function This command verifies a tag type. Enter the tag
type and verify the change with the !RFID ?
command.
Explicit Form
!RFID TAGTYPE ISO/TI/PHILPS
Parameters
ISO
Sets the industry standard ISO-15693
tag type
TI
Sets Texas-Instrument’s ‘Tag-it HF’ tag
type.
PHILPS
Sets Philips ‘I-Code1 (SL1)’ tag type.
Response No specific response
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID TAGTYPE ISO
!RFID ?
From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
Mark/OverRide State: OFF
VOID Stamp Message: <NoStampMsg>
LED Flash Control: ON
| | |
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 61