Filter
Top Products
PRINTING LABELS AND TAGS
6. In the DOS Editor window, type the commands and data to
be sent to the printer.
NOTE: If you are using a printer with a serial port (COM port), it may be
necessary to save the file and print directly from the Command window.
Refer to If using a printer with a serial port.
7. On the File menu, choose Print.
8. In the Print dialog, verify that the Complete document option
is selected. Then, click OK. The label is sent to the printer.
9. On the File menu, click Exit.
10. At the prompt, type exit. The Command window closes.
If using a printer with a serial port:
1. In the Command window, at the prompt, type exit. The
Command window closes.
2. On the File menu, choose Save.
Copyright © 2004, Cognitive. 20