Filter
Top Products
PROGRAMMING
The ## indicates the number you need to enter to increase the darkness.
For example, you would type the line as VARIABLE DARKNESS 20.
Start with 20, then gradually increase the number to 30, then 40, and
so on. The higher the number, the hotter the printhead and the darker
the print.
NOTE: A darkness setting of 50 or more may decrease the life of the
printhead.
Send this file to the printer by going to File->Print. The printer will not
print anything, but the ready light will blink off and on. When you have
a solid Green ready light, cycle the power on the printer.
NOTE: If using a UNIX/Linux system, create a text file in an editor, then print or
copy the file to the printer.
Upgrade From Blazer Printer
Use the following to avoid reformatting existing Blazer label formats
when upgrading to a newer model Cognitive printer.
Type in the following commands from a DOS Editor or from Notepad on
your computer:
! 0 0 0 0 (Must use zero, space between each character)
VARIABLE MODE 2 100
VARIABLE WRITE
END
Send this file to the printer by going to File->Print. The printer will not
print anything, but the ready light will blink off and on. When you have
a solid Green ready light, cycle the power (turn off/on).
NOTE: If using a UNIX/Linux system, you will need to create a text file in an
editor, then print or copy the file to the printer.
Copyright © 2004, Cognitive. 70