Filter
Top Products
PROGRAMMING
!RFID ?
Function This command queries the printer for a summary of
the existing printer settings for RFID functionality.
Explicit Form
!RFID ?
Parameters None
Response See example below.
Command Type RFID Setup/Debug Command
Example From Printer:
Setup/Config Parameters:
Assigned Tag Type: ISO15693
Mark/OverRide State: OFF
VOID Stamp Message: <NoStampMsg>
LED Flash Control: ON
LED Flash Duration: 250 MSecs
SelecTag before Cmd: ON
TxPowerRF after Cmd: ON
ReadTag after Write: ON
Confirm Commands: OFF
Retry Command: 2 Times
Base Cmd Timeout: 10 MSecs
Select Tag Timeout: 70 MSecs
Read Tag Timeout: 16 MSecs
Write Tag Timeout: 32 MSecs
Lock Tag Timeout: 26 MSecs
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 52