Compaq SW3323 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
Table 3-1
Factory Default Settings
Parameter Default Value
Active Aging Time 300
Auto-negotiation Enable Yes
Broadcast Cutoff Rate 500000
BootP/DHCP Enable Yes
Bridge Priority 32768
Class of Service Enable No
Class of Service Port Priority 0
Class of Service Priority Threshold 4
Flow Control Enable (Terminal) No
Forward Delay (Seconds) 15
Full Duplex Yes
Hello Time (Seconds) 2
Max Age (Seconds) 20
Password public
Path Cost 1 for 1000 Mbps speed ports
10 for 100Mbps speed ports
100 for 10Mbps speed ports
Port Enable Yes
Port Priority 128
Port Speed 100
Port Mirroring Enable No
Screen Timeout (Minutes) 5
SNMP Private Community Name private
SNMP Public Community Name public
Spanning Tree Protocol Enable No
Terminal Baud Rate 9600
VLAN Enable No
VLAN Port Type Access