Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-5
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
Main Menu
The Main Menu is the first screen seen after successfully logging in to the system.
Figure 3-3 shows the Main Menu and Table 3-2 describes the menu.
Figure 3-3 Main Menu
Table 3-2
Main Menu Descriptions
Selection Description
System Configuration Menu Contains commands and parameters that reflect the global operation of the switch.
Switch Configuration Menu
Provides access to information and parameters affecting the functional operation of
the switch. You can configure items such as Forwarding Table, Spanning Tree, and
virtual LAN (VLAN) parameters.
Port Menu Shows the configuration of the individual ports on the switch and allows you to
modify switch port operation.
Switch Statistics Screen Presents switch-level and port-level statistics.
General Information Screen Displays the system software version, serial number of the switch, base MAC
address, system up time and power-up count.
Download Software Menu
Contains parameters and commands for initiating a software download to the
switch to upgrade the switch operating software.
Save Current Configuration Saves the current switch operating parameters to non-volatile memory.
Return to Default
Configuration
Restores switch operating parameters to their factory defaults. You must reset the
switch for the default parameters to take effect.
Logout Logs out of the console interface. Once you logout, you must enter a password
before you can access the console interface again.
Reset Performs a software reset of the switch by restarting the system software and
reloading all operating parameters.
MAIN MENU Access Control: READ/WRITE
a. System Configuration Menu
b. Switch Configuration Menu
c. Port Menu
d. Switch Statistics Screen
e. General Information Screen
f. Download Software Menu
g. Save Current Configuration
h. Return to Default Configuration
i. Logout
j. Reset
Enter Selection: