Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12 Configuring and Monitoring the Switch
Writer: Fran Spragens Project: Configuring and Monitoring the Switch Comments:
File Name:3324_4.doc Last Saved On:3/15/99 1:11 PM
To configure the forwarding table, do the following:
1.
Select Switch Configuration Menu from the Main Menu.
2.
Select Forwarding Table Configuration Menu.
To either make an existing dynamic entry static (Make Entry Static) or delete a
static entry (Delete Static Entry), do the following:
1.
Select the letter associated with the option.
The following message prompt displays:
Enter MAC Address:
2. Enter the MAC address. Press <Enter>.
To either add a static entry (Add Static Entry) or modify a static entry (Modify
Static Entry), do the following:
1.
Select the letter associated with the option.
The following message prompt displays:
Enter MAC Address:
2. Enter the MAC address. Press <Enter>.
The following message prompt displays:
Forward to Port (Y/N):
3. Do one of the following:
a. If you select “Y” and Press <Enter>, the system displays:
Enter Port Number (1-26):
Enter the port number and press <Enter>.
b. If you select “N” and press <Enter>, the system displays “discard” in
the Disposition field.