Compaq SW3323 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

'SQTEU7;7;7;(YEP7TIIH7[MXGL9WIV+YMHI
;VMXIV
*VER7TVEKIRW
4VSNIGX
72141EREKIQIRX
'SQQIRXW

*MPI2EQI
CHSG
0EWX7EZIH3R
%1
The SW3322/SW3323/SW3324 switch supports four standard MIBs:
RFC 1213 - Management Information Base for Network Management of
TCP/IP based Internets (MIBII)
RFC 1398 - Definitions of Managed Objects for the Ethernet-like
Interface Types (Ethernet MIB)
RFC 1493 - Definitions of Managed Objects for Bridges
RFC 1757 - Remote Network Monitoring Management Information
Base
The switch also supports Compaq proprietary MIB extensions.
6*'1-&--
RFC 1213 provides management of switch system-level parameters, including
TCP/IP protocol-related statistics, IP addressing, routing table information, and
interface statistics for each switch port. MIB-II is the standard MIB defined by
RFC 1213. All agent devices operating SNMP are required to support at least
part of MIB-II.
This MIB reports information about the protocols and network interfaces
supported on the agent itself, as well as other general information. The MIB is
divided into a number of groups, each of which corresponds to a specific
protocol or set of information. Some groups are defined in other RFC
documents.