Filter
Top Products
E-22
Adjustment of the Projection Image
Adjusting the Projection Image
Adjusting the Tilt (Slant)
The position and tilt angle of the projected image can be adjusted by adjusting the adjustable feet. Press both the
left and right tilt adjustment levers to lift the main unit, and release them when the desired height is reached. You
can fine-adjust the tilt by turning the bottom section of the adjustable feet. Turning this section counterclockwise
raises the main unit, and turning it clockwise lowers the main unit. Also, you can adjust the tilt angle by turning the
adjustable foot located on the rear left of the main unit.
Adjust the projection image to the screen.
• When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of
the projector lens.)
• When the image is shifted up or down, use the tilt foot to adjust the projector vertically.
• When the image is slanted, turn the left or right tilt foot to adjust.
• When there is keystone distortion of the image, adjust with "Keystone" of the menu operations.
→
See Pages E-33 and 38.
Right angle
Making Focus/Zoom Adjustments
Turn the focus ring/zoom lever of the projection lens and adjust the projection image.
Up
Down
Up
Down
Tilt adjust levers
Adjustable feet
• Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing
so could result in the projector slipping or falling over and could cause an accident or breakdown.
• When moving the projector, be sure to return the tilt foot to the original position.
• The air intake vents on the side of the projector draw in cooling air with a strong air current. When
cloth or paper adheres to and covers the air intake vents, the internal temperature rises and could
cause an accident or breakdown.
• Depending upon the material of the placement location, the rubber feet may soil on the placement
surface.
CAUTION