Filter
Top Products
E-29
Operation with the Projector
The ability to turn on and turn off the pointer is not
available from the operation panel of the projector.
Operation with the Remote Control
Press the POINTER/SET button.
One more press of the POINTER/SET button while the
pointer is displayed will turn off the pointer display.
Moving the Pointer
Operation with the Projector
Press the SCROLL (
) buttons.
Operation with the Remote Control
Press the SCROLL (
) buttons.
See Page E-35 for information about the form, color, and size of the pointer.
Regular Operation
Displaying the Pointer
This operation displays the pointer in the currently projected image.
NOTE:
• When the brightness is adjusted while the pointer is displayed, the pointer will disappear temporarily; however, it will reappear
soon.
Deleting the Projection Image and Audio
This operation deletes the currently projected image and audio without switching off the lamp.
Operation with the Projector
The ability to delete the projection image is not available from
the operation panel of the projector.
Operation with the Remote Control
Press the MUTE button.
NOTE: When a fixed period of time elapses (about 30 minutes) with the video/audio muted, a message will be displayed to
check whether to shut down the projector. Selection of "Yes" will set the projector to the standby mode, while a selection of "No"
will again delete the video/audio.
When there has been an absence of an operation for 15 seconds during the display of the above confirmation message, the pro-
jector automatically enters the standby mode.