E-37
When VIDEO input has been selected
Contrast ...........................Adjusts the contrast of the project-
ed image in the range of -50 to 50.
Brightness .......................Adjusts the brightness of the pro-
jected image in the range of -50 to
50.
Color ................................Adjusts the deepness of the color
in the range of -50 to 50.
Hue ..................................Adjusts the hue in the range of
-50 to 50. As the numerical value
becomes lower, the color becomes
greenish and as the numerical
value increases, the color becomes
reddish.
Sharpness .......................Selects the sharpness of the pro-
jected image from amongst 5 lev-
els. As the numerical value increas-
es, the sharpness of the image is
enhanced.
Sub menu: Video Select
This selects the input signal system.
Auto (detects the signal system automatically) / NTSC 3.58
/ NTSC 4.43 / SECAM / PAL B, G, H, I / PAL M / PAL N
During VIDEO input
Menu Description
Sub menu: Sync adjustment
Clock ...............................Adjusts the horizontal size of the
projected image in the range of -50
to 50.
Phase ..............................Adjusts the noise/flickering of the
projected image in the range of -50
to 50.
Horizontal ........................Adjusts the horizontal position of
the projected image in the range of
-50 to 50.
Vertical ............................Adjusts the vertical position of the
projected image in the range of -50
to 50.
Auto adjustment ..............Performs sync adjustment auto-
matically.
NOTE: Depending on the PC input signal, there might not be a change as far as from -50 to 50.