Filter
Top Products
E-8
Document cover
The document or printed material to be read
is placed under this cover.
See Page E-30.
Operation panel
The buttons used for regular operation are
located here. See Page E-11.
Speaker
Air Vent A (air filter)
(side of main unit)
Air is taken in through this
vent. An air filter is provided
to prevent dust from getting
inside the projector.
See page E-45.
Theft prevention lock
Please see the Note below.
Tilt adjustment lever
Press here to adjust the tilt foot. See Page
E-22.
Tilt foot
This foot is used to adjust the vertical angle
of the projection as well as the left-right bal-
ance. Turning it to the left extends it and turn-
ing it to the right shortens it. See Page E-22.
Lens cap
Zoom lever
Turn this to adjust the screen size. See Page E-22.
Projection lens
The image is projected from
here.
* Be sure to remove the lens
cap before projecting.
Focus adjustment ring
Turn this to adjust the focus.
See Page E-22.
Tilt foot
Remote control IR sensor
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Projector)
Handle
• Extended
Press lightly on the left side
of the handle and it rotates
180˚ and comes out.
• Retracted
Rotate the handle while
pressing on its right side to
store it.
NOTE
About the anti-theft lock
The anti-theft lock is compatible with Kensington security cable lock.
Contact the following for more information about the products.
Kensington Technology Group
2000 Alameda de las Pulgas
Second Floor
San Mateo, California 94403-1289, U.S.A.
Phone: (650) 572-2700
Fax: (650) 572-9675
URL: http://www.kensington.com
7mm
3mm