CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 153
600
1200
1800
2400
4800
9600
19200
Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8.
Parity: Change this value to enable parity bit checking. Select from the following dropdown options:
None: No parity checking. (Default)
Even: parity bit will always be even.
Odd: parity bit will always be odd.
Mark: parity bit will always be odd and always 1.
Space: parity bit will always be even and always 0.
Stop Bits: Number of bits to initiate the stop period. Select from these dropdown values: 1, 1.5, and 2.
Hardware (RTS/CTS): Use RTS (Request To Send)/CTS (Clear To Send) to enable flow control.
Software (XON/XOFF): Use XON/XOFF to enable flow control.
Linefeeds: Select how you want linefeeds translated (CR = carriage return and LF = line feed).
Ignore
CR/LF
CR
LF