Filter
Top Products
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 26
4.2 Getting Started – First Time Setup
The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to
something you choose, and establish an optimal WiFi security mode. The MBR1400 comes out of the box with a unique
password at WPA1/WPA2 WiFi security level.
NOTE: Instructions for the First Time Setup Wizard are also located in the Setup Guide included with the MBR1400.
1) Open a browser window and type ―cp/‖ or
―192.168.0.1‖ into the address bar. Press
enter/return.
2) When prompted for your password, type the eight
character Default Password found on the product
label on the bottom of the MBR1400 (this is also the
last 8 digits of the router‘s MAC address).
3) When you log in for the first time, you will be
automatically directed to the FIRST TIME SETUP
WIZARD. (Otherwise, go to Getting Started → First
Time Setup).
4) CradlePoint recommends that you change the
router‘s ADMINISTRATOR PASSWORD, which is
used to log in to the administration pages. The
administrator password is separate from the WiFi
security password, although initially the Default Password is used for both.
5) You can select your TIME ZONE from a dropdown list. (This may be necessary to properly show time in your router
log, but typically your router will automatically determine your time zone through your browser.) Click NEXT.