Cradlepoint MBR1400LE Network Router User Manual


 
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 79
6.7.3 Local Network Interfaces
Each LAN typeWiFi, Ethernet, and VLANhas a separate section with configuration options. Unless the default
configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired
interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor
(see above).
Select from the following tabs:
Wireless (WiFi) Network Settings
Ethernet Port Configuration
VLAN Interfaces
Wireless (WiFi) Network Settings
The MBR1400 can broadcast as many as
four SSIDs (service set identifiers the
names for WiFi networks). One primary WiFi
network is enabled by default, while you may
have enabled a second guest network when
using the First Time Setup Wizard. You have
the ability to change the settings for either of
these networks and/or enable two additional
networks.
Wireless Radio: Enable/Disable. (Default:
Enabled). Leave enabled unless you don‘t
want any WiFi networks broadcast from your router.
Select a WiFi network and click Edit to change the settings.